{"product_id":"yokomo-super-drift-sd-2-0-assemble-kit-sdr-020","title":"Yokomo Super Drift SD 2.0 Assemble Kit - SDR-020","description":"\u003cp\u003eThe SD series of tuning drift cars, which can achieve various specifications by reconfiguring parts, has evolved into the latest version, SD2.0. While keeping the basic design of graphite double-deck chassis and gear-drive RWD, a thorough review of the weight balance and changes to the front Ackermann ratio have been made to further accentuate the latest RWD drift style.\u003c\/p\u003e\u003cp\u003eFeatures:\u003c\/p\u003e\u003cp\u003e Variable transmission with selectable positive torque (4 gears) or anti-torque (3 gears)\u003c\/p\u003e\u003cp\u003e High-precision aluminum rear bulkhead\u003c\/p\u003e\u003cp\u003e Rear diff accessible by simply removing\/replacing the rear bulkhead cap\u003c\/p\u003e\u003cp\u003e Rear traction adjustable by differential height adjustment\u003c\/p\u003e\u003cp\u003e Separate chassis construction allows bulkhead height change\u003c\/p\u003e\u003cp\u003e Servo mounts closer to the rear for 3:7 weight balance\u003c\/p\u003e\u003cp\u003e Ackermann ratio setting with new steering block for improved maneuverability\u003c\/p\u003e\u003cp\u003e New lightweight slide rack\u003c\/p\u003e\u003cp\u003e New rear hub carriers for improved rear traction\u003c\/p\u003e\u003cp\u003eGraphite double-deck chassis\u003c\/p\u003e\u003cp\u003eA graphite double-deck chassis designed with rear load in mind specialized for drift driving. With a slim silhouette and overall meat-free, it has supple characteristics.\u003c\/p\u003e\u003cp\u003eLightweight front circumference\u003c\/p\u003e\u003cp\u003eFront section with a resin bulkhead. By finishing the front part lightweight, a moderate front contact feeling and turning ability are achieved.\u003c\/p\u003e\u003cp\u003eNew steering block\u003c\/p\u003e\u003cp\u003eA newly designed steering block to optimize the Ackermann ratio and increase the steering angle.\u003c\/p\u003e\u003cp\u003eLightweight Slide Rack\u003c\/p\u003e\u003cp\u003eThe lightweight slide rack rails held by three bearings also contribute to weight reduction at the front. The steering response has been enhanced for sharp handling.\u003c\/p\u003e\u003cp\u003eOverwhelming cutting angle\u003c\/p\u003e\u003cp\u003eIt achieves maximum cutting angles as standard kits and supports deep drift angles. With an almost parallel Ackermann ratio, it is possible to drive smoothly even on low-grip surfaces such as P tiles.\u003c\/p\u003e\u003cp\u003eRear-mounted steering servo\u003c\/p\u003e\u003cp\u003eServo mounted closer to the rear via steerlink crank. In addition to this, it also supports the conventional bell crank system and the front inverted servo mounting.\u003c\/p\u003e\u003cp\u003eSplit rear section\u003c\/p\u003e\u003cp\u003eThe main chassis and the rear end of the upper deck are divided to increase the freedom of setting the rear section. Good maintainability.\u003c\/p\u003e\u003cp\u003eBattery mounted at the far end\u003c\/p\u003e\u003cp\u003eThe running battery is dedicated to short-size Li-po. The battery position is set at the rear end to increase the rear load and gain traction. The weight distribution is 3 in the front and 7 in the rear, which is suitable for RWD drift cars.\u003c\/p\u003e\u003cp\u003eWeight towards the rear axle\u003c\/p\u003e\u003cp\u003eThe motor is designed to be high-mounted on the rear axle to maximize rear tire traction. The motor position can be rotated around the spur gear axis.\u003c\/p\u003e\u003cp\u003eAluminum rear bulkhead\u003c\/p\u003e\u003cp\u003eThe aluminum bulkhead is highly accurate and achieves high driving efficiency. By recombining gears, it is possible to choose between 3 gears (positive torque) and 4 gears (anti-torque).\u003c\/p\u003e\u003cp\u003eNewly designed rear hub carrier\u003c\/p\u003e\u003cp\u003eThe new rear hub carrier has been redesigned to revise the relationship between the axle and the sus pin position and roll more aggressively.\u003c\/p\u003e\u003cp\u003eAluminum oil dampers and springs\u003c\/p\u003e\u003cp\u003eThe suspension combines the well-established aluminum vehicle height-adjustable oil damper with a special spring for drifting. The rear is equipped with a progressive spring as standard that absorbs vibrations and enhances the feeling of grounding.\u003c\/p\u003e","brand":"Rckitout","offers":[{"title":"Default Title","offer_id":53124144660819,"sku":"S1601891","price":489.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1044\/6726\/7923\/files\/sdr-020.jpg?v=1772184807","url":"https:\/\/rcshopper.com\/products\/yokomo-super-drift-sd-2-0-assemble-kit-sdr-020","provider":"Rcshopper","version":"1.0","type":"link"}